Device Management
DVR User Manual
95
②
Check SNMPv1or SNMPv2 to enable this function.
③
Set the port of the SNMP.
④
Set the trap address and the trap port.
⑤
Click “Apply” to save the settings.
Trap Address: The IP address of SNMP host.
Trap Port: The port of SNMP host.
Tips:
Before setting the SNMP, please download the SNMP software and manage to receive
the device information via SNMP port. By setting the trap address, the device is allowed to
send the alarm event and exception message to the monitoring center.
11.1.11 View Network Status
Click Start
Settings
Network
Network Status to view the network status or click
on
the tool bar at the bottom of the live preview interface to view network status conveniently.
11.2 Basic Configuration
11.2.1 Common Configuration
Click Start
Settings
System
Basic
General Settings to go to the following interface. Set
the device name, device No., language, video format and main output resolution. Enable or
disable wizard, “Log In Automatically”, “Log Out Automatically” (if checked, you can set the
wait time) “App Live Self-Adaption” and “Dwell Automatically” (if checked, you can set the
wait time). Click “Apply” to save the settings.
Summary of Contents for PS8E1N2
Page 1: ...8 Channel Recorder 1U PS8E1N2...
Page 118: ...FAQ DVR User Manual 112 Fig 9 2...
Page 121: ...A4...
