Technogym Jog Now Excite+ 700, Technical Service Manual

Page: 107 / 228

JOG NOW : Service & maintenance manual - rev. 6.2
Page 6.19
Error
code
Error Description Possible solution
10 10/Oli
Inverter overload caused by a DC current
exceeding, for the maximum allowed time
(I2t), the maximum permissible threshold
for the inverter.
•
(*).
11 11/OLm
Motor overload caused by a DC current
exceeding, for the maximum allowed time
(I2t), the maximum permissible threshold
for the motor in question.
-
12 12/OLr Braking resistor overload.
•
Check the resistor=150 Ω;
•
low kit
Driver.
19 19/EM
EMERGENCY. Is generated when low kit
drive receives a software emergency signal
that is not accompanied by a hardware
emergency signal
-
20
20/
SFAn
LOW KIT DRIVER COVER PLATE FAN.
This error is generated if there is a
malfunction on the fan mounted on the
driver’s cover plate, for at least 5 sec.
•
low kit driver
cover plate fan.
21
21/
PFAn
LOW KIT DRIVER INTERNAL FAN.
This error is generated if there is a
malfunction on the internal low kit driver
fan, for at least 5 sec
•
low kit driver
internal fan.
22 22/IMV
INVERTER POWER SUPPLY: This error
is generated if a voltage <156 VAC for at
least 1 sec. when the AC motor is working
or for at least 10 sec. when AC motor is not
working.
-
23 23/SHC
SHORT CIRCUIT. Is generated in the event
of a short circuit between a motor phase and
earth.
•
Check the belt motor.
24 24/OHS
OVERHEATING of the dissipater sensor:
This error is generated if a malfunction of
the dissipater sensor last more than 1 sec.
•
low kit d
river;
•
(*).
Note (*): In case of errors related to high current consumption (such as E01), we
recommend performing a test that consists of walking on the treadmill at a pre-
established speed and checking the current consumption, according to the table below.
USER WEIGHT FREQUENCY/SPEED CURRENT DRAW
60Kg 1500Hz / 5Km/h 5A
70Kg 1500Hz / 5Km/h 5.3A
80Kg 1500Hz / 5Km/h 5.6A
On models not equipped with an encoder, in which the speed readout is always "0", use the
frequency value given in the table as a reference.