Technogym Jog Now Excite+ 700, Technical Service Manual

Page: 200 / 228

JOG NOW : Service & maintenance manual - rev. 6.2
Pagina 9.14
9.2.3.1. Read from low kit
To read the parameter values from the low kit memory and view them on the display, scroll using
the
+/- keys until the display shows:
READ FROM LOW KIT ?
Press
ENTER to read the errors from the low kit, and return to the upper menu level by pressing
CLEAR for a few seconds.
9.2.3.2. Write to low kit
To write the values of the currently displayed parameters to the low kit, scroll using the +/- keys
until the display shows:
WRITE TO LOW KIT ?
Press
ENTER to write the new data to the low kit, and return to the upper menu level by pressing
CLEAR for a few seconds.
9.2.3.3. Machine usage data
The machine usage data on the display is updated every 10 minutes. This means that, whenever the
machine is switched off, any data modified after the last memory update will be lost.
MESSAGE ON DISPLAY DESCRIPTION
Life AC M: Minutes x 10 of tread belt motor operation
Life DC M: Minutes of elevation motor operation
Life Kit H: Minutes x 10 of operation of the upper assembly
Life Kit L: Minutes x 10 of operation of the lower assembly
Tot. Km: Total km travelled
By selecting one of the items in the above table it is possible to modify its content, but only after
having cleared its value. When the
ENTER key is pressed the message "Reset life..." appears,
followed by the name of the selected item; pressing ENTER again resets the value of the selected
item, while pressing CLEAR reverts to the preceding value.