Technogym Jog Now Excite+ 700, Technical Service Manual

Page: 151 / 228

JOG NOW : Service & maintenance manual - rev. 6.2
Page 7.19
7.5. DISASSEMBLING THE EMERGENCY BUTTON
Figure 7.5-1
Carry out the procedure described in paragraph:
7.1. “Disassembling the Display”.
1.
Back off the 8 screws (a) using a medium
Phillips screwdriver.
2.
Remove the front display casing and place it
on a work bench.
Figure 7.5-2
3. Disconnect the cable (b) from the two fast-on
connectors on the emergency button.
4.
Back off the 4 screws (c) using a small
Phillips screwdriver.
5.
Remove the emergency button.
6.
Back off the 2 screws (d) using a medium
Phillips screwdriver and remove the two
microswitches.
Figure 7.5-3
It is possible to disassemble the emergency
button avoiding to disassemble the complete
dashboard:
7.
Back off the 2 screws (e) using a medium
Phillips screwdriver.
8.
Remove the rear covering casing (f) to enter
to the emergency device.
To reassembly the Emergency Button, carry out
the above steps in the reverse order.