Technogym Jog Now Excite+ 700, Technical Service Manual

Page: 154 / 228

JOG NOW : Service & maintenance manual - rev. 6.2
Page 7.22
7.7. DISASSEMBLING THE HAND SENSOR
Only for 700 LED and VISIO models.
Figure 7.7-1
Turn off the machine and unplug the mains lead
from the wall outlet.
For each sensor:
1.
Back off the 2 screws (a) using a small
Phillips screwdriver.
Figure 7.7-2
2. Raise the upper and inferior sensor; unplug
the 2 fast-on
(b) and (c) .
3.
Remove the 2 sensors.
During the reassembly: be careful to
don’t press the cables, using the two
guides highlight in the figure on the side.
To reassemble the sensors, carry out the above
steps in reverse order.