Technicolor COM2000 Integrator'S Manual Download Page 55 | Manualshive

Page: 55 / 126

background image

w w w . t e c h n i c o l o r . c o m / m c s

Page 55

Following is a brief description of the relevant fields on this page:



Usage -

This field allows you to select which type of file transfer you wish to undertake for a

particular card. The available options are shown below. It should be noted that when selecting
any option other than ‘2’, the card will appear to go through the usual software update cycle,
but that it will revert to the current build of code once it has rebooted.

0 = Set_Log_IP – This option allows you to identify the IP address to which you wish to send
COM46 logging for monitoring by a syslog utility.

1= MT – This option allows upload of Mediatune channel files.

2= SW_Upgrade – This is one of two means of updating the software in a COM46 card.

3= Log – This option allows you to copy a COM46 card’s internal log files to a PC.

4= License – This option allows you to load various software licenses to enable new modes and
features in the COM46. One example might be upgrading the COM46-FLX to HD mode (only
with prior authorization from DIRECTV)

7 = KeyRenewal – This option will send a Pro:Idiom key renewal to any TV tuned to a RF
channel on the card selected.

Note: Options 5 AND 6 are not available to users and are for development purposes only.



Server_IP Address -

This field gives the IP address of the server from which Filename: will

be uploaded. When doing a Mode 2 upgrade, this field can be the address of another COM46
card to which a SW update has already been uploaded. See the Browser Upload description
and Section 7 for details.



Filename -

The name of the SW update binary or license file to upload.



Browser Upload -

To eliminate the need for a 3rd party TFTP server, a COM46 can now act

as a TFTP server for other cards in the system but the file to be sent must first be uploaded to
the COM46 to be used.

The Browser Upload field allows you to upload the selected file to the card whose IP address
is shown below the Browser Upload heading from the web interface. The Choose File and
Upload buttons are used to find and upload the desired file(s) from the browser.

«
...
53
54
55
56
57
...
»

Summary of Contents for COM2000































































































































Reviews:

No comments

Related manuals for COM2000

Pure Link 1300 Series

Brand: lancer Pages: 20

Brand: C&TT Pages: 19

Brand: NEXT pool Pages: 19

Brand: Atmos Pages: 36

Brand: Aristel Pages: 40

Brand: AmeriWater Pages: 14

EASA-PHONE KX-T123220

Brand: Panasonic Pages: 5

Brand: Scientific Atlanta Pages: 44

Brand: Rototec Pages: 13

Brand: Aerus Pages: 68

Brand: Aria Technologies Pages: 96

Brand: AT&T Pages: 290

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands