Technica MediaGateway User Manual Download Page 58

Page: 58 / 108

MediaGateway



User Manual

configured MAC address as destination MAC address will be dropped and forwarded

Note:

This drop feature is only available if mirroring on this port is activated

3.6.3.4

100BASE-T1 Ports

Figure 3-27: 100BASE-T1 Ports

Port name

: Here you can change the Port Name

Default VLAN ID (hex)

: please define one hexadecimal value between 0x1 and 0xFFF.

Incoming traffic is tagged with this value, if NOT already tagged! It is NOT overwriting

VLAN-IDs. This rule is valid for innerVLAN and outerVLAN!

VLAN membership

: as many as wished values between 0x1 and 0xFFF can be defined

here separated by “,” [E.g.: 100, 101, EDF, …]. Outgoing traffic can leave the switch on

this port, if the data is tagged with one of the defined VLAN-IDs. Only outerVLANs are

checked!

Egress VID remarking

: this must be defined for innerVLAN and outerVLAN separately.

Summary of Contents for MediaGateway













































































































Search results

Summary of Contents for MediaGateway

Reviews:

Related manuals for MediaGateway

Brands by name

Popular brands

Technica MediaGateway, User Manual

Search results

Summary of Contents for MediaGateway

Reviews:

Related manuals for MediaGateway

Brands by name

Popular brands