MediaGateway
User Manual
73
Figure 3-39: CAN Parameters
CAN Listen-Only Mode
: By checking the box,
Listen-Only mode
is active for the
selected CAN channel.
Listen-Only
means no acknowledge is done for CAN messages
on this bus by the MediaGateway. In deactivated
Listen-Only Mode
, the MediaGateway
acknowledges every message on the CAN channel. This is necessary if there is no
other communication partner for the CAN messages.
Ethernet to CAN: Incoming configurable parameters:
EtherType (hex)
: The EtherType is fixed to value 0x1887. No change possible.
CAN to Ethernet: Outgoing configurable parameters:
Target MAC address
: Target MAC address must respect the usual format (a sequence
of six hexadecimal numbers having two bytes size each, separated by a colon)
xx:xx:xx:xx:xx:xx. Note that entering Broadcast MAC address FF:FF:FF:FF:FF:FF as
Target MAC address will cause sending time stamps frames to be disabled
EtherType (hex)
: The EtherType is a two bytes hexadecimal number. The EtherType
field can accept any value between 0 and FFFF.
Figure 3-40: CAN-Eth-Gateway configurable parameters
