MediaGateway
User Manual
45
Rx octets
: decimal value of received octets on this port.
Prevent Sleep Port
: This option is available if the function “Prevent sleep” on “Control
panel” tab is deactivated.
This port is monitored: If there is incoming traffic on this port, the
MediaGateway doesn’t fall asleep.
This port is not monitored: The MediaGateway can go asleep, even if there is
incoming traffic on this port.
Mirroring
: On each switch only on port can be a mirroring port. Please select the ports
to be mirrored
SFP option
: Here must be chosen the correct SFP module if any
is plugged in.
Fiber module
: please select this option for fiber optical
SFP-modules.
RJ45 module
: please select this option for copper modules.
Base-T1 / BroadR-Reach® module
: please select this option for a BASE-T1
modules from Technica-Engineering GmbH
Speed
: If no autonegotiation is not available, please select the speed of the SFP
module 100BASE-T1 for 100Mbps and 1000BASE-T1 for 1000Mbps
BASE-T1 / BroadR-Reach® mode
: please configure as slave if the connected device is
master and the other way around. This is only visible, if a BASE-T1 SFP Module is used.
Module information
: Based on selected SFP Module and detected hardware, different
information about the SFP Module is displayed here.
Detected features
: Based on selected SFP Module and detected hardware, different
information about the features of the SFP Module is displayed here.
Drop ingress packets with…
:
Inner VLAN IDs
: as many as wished values between 0x1 and 0xFFF can be defined
separated by “,” [E.g.: 100, 101, EDF, …]. It is a filter for incoming traffic. Data with
configured VLAN-ID will be dropped and not forwarded, when incoming on this port.
Source IP
: one IP address can be configured here. It is a filter for incoming traffic. Data
with configured IP address as source IP address will be dropped and not forwarded,
when incoming on this port.
