Technica MediaGateway User Manual Download Page 22

Page: 22 / 108

MediaGateway



User Manual

Default

: You can reset the configuration settings to default. All values will be set to

default except the IP address. It will be not modified.

Enable camera power

: The camera power output pins are disabled by default. To

activate them, this checkbox should be checked.

Prevent sleep

: If you do not want to use a Wakeup line, you can enable the “Prevent

sleep” checkbox (default). This will keep the device running without entering the sleep

mode. If this option is disabled, the device will go to sleep if no activity is recognized

according to observed ports. (Please see the configuration of each port in

HAPTER

3.6)

Diagnose service

: If you enable this functionality, the MediaGateway will send

periodically status information about its state. For example, transmitted and dropped

frame counters, link quality, etc. For more details please see

HAPTER

3.4.2

MediaGateway Feature Activation

MediaGateway features

and

Activation key

CAN Gateway

FlexRay Gateway

BMW Extra Functions (not available)

For activation of the extra features (CAN Gateway, FlexRay Gateway) an activation key

is needed. Please contact

[email protected]

if you want to order an

activation key. Or contact

[email protected]

for more

information about the conditions of these features.

For the activation key please write an Email to

[email protected]

with

following information:

Order number

UUID of the MediaGateway

Ordered Feature

Summary of Contents for MediaGateway













































































































Search results

Summary of Contents for MediaGateway

Reviews:

Related manuals for MediaGateway

Brands by name

Popular brands

Technica MediaGateway, User Manual

Search results

Summary of Contents for MediaGateway

Reviews:

Related manuals for MediaGateway

Brands by name

Popular brands