MediaGateway
User Manual
51
Note
: This is the recommended use case of the MediaGateway. Networks in vehicles
are often already single-tagged. In this use case you can prove the flexibility of the
MediaGateway, being independent from single-tagged networks.
3.6.3.1
Ethernet Port RJ-45
Figure 3-24: Details of the Ethernet Port RJ-45
Port name
: Here you can change the Port Name
Default VLAN ID (hex)
: please define one hexadecimal value between 0x1 and 0xFFF.
Incoming traffic is tagged with this value, if NOT already tagged! It is NOT overwriting
VLAN-IDs. This rule is valid for innerVLAN and outerVLAN!
VLAN membership
: as many as wished values between 0x1 and 0xFFF can be defined
here separated by “,” [E.g.: 100, 101, EDF, …]. Outgoing traffic can leave the switch on
this port, if the data is tagged with one of the defined VLAN-IDs. Only outerVLANs are
checked!
Egress VID remarking
: this must be defined for innerVLAN and outerVLAN separately.
