MediaGateway
User Manual
36
Note:
this is only valid for one switch! For example, if you want to mirror incoming
traffic on S3-P3 to S1-P5, it is necessary to mirror the traffic on S3-P4, then S2-P4 and
then on S1-P5.
SFP option
: In this option, the correct SFP Module has to be
chosen in case a SFP Module is plugged in.
Fiber module
: please select this option for fiber optical
SFP-modules.
RJ45 module
: please select this option for copper modules.
Base-T1 / BroadR-Reach® module
: please select this option for a BASE-T1
modules from Technica-Engineering GmbH
Speed
: If autonegotiation is not available, please select the speed of the SFP module
100BASE-T1 for 100Mbps and 1000BASE-T1 for 1000Mbps
BASE-T1 / BroadR-Reach® mode
: please configure as slave if the connected device is
master and the other way around. This is only visible, if a BASE-T1 SFP Module is used.
Module information
: Based on selected SFP Module and detected hardware, different
information about the SFP Module is displayed here.
Detected features
: Based on selected SFP Module and detected hardware, different
information about the features of the SFP Module is displayed here.
Drop ingress packets with…
:
Source IP
: one IP address can be configured here. It is a filter for incoming traffic. Data
with configured IP address as source IP address will be dropped and not forwarded,
when incoming on this port.
Destination IP
: one IP address can be configured here. It is a filter for incoming traffic.
Data with configured IP address as destination IP address will be dropped and not
forwarded.
Drop mirrored packets with…
:
Each field allows one MAC address. In total
six MAC addresses can be configured. It is a
filter for outgoing traffic. Data with
configured MAC address as destination MAC
address will be dropped and forwarded
Note:
This drop feature is only available if mirroring on this port is activated
