MediaGateway
User Manual
20
3.2
Save changes
If you changed anything in the configuration the following hint appears every time:
Figure 3-2: Save Configuration
You don’t have to save every time when this hint appears. You can make all wished
changes and save the configuration at the end. Please check the box “restart after
saving” and then press the “Save configuration” button.
After the restart, all changes are applied.
3.3
System Information tab
Figure 3-3: System Information tab
On the tab “System Information “, some status information about the device is
displayed. You can check the version number of the application firmware and the
bootloader or the unique MAC address of the device. The version number registers of
the switch and PHY chips are displayed for information only.
