CM 100 High
User Manual
37
4.5.2
Host Port
This is the 100BASE-T1 Port in MQS-Connector on the frontside of the device.
Figure 4-19: Host Port
Port name
: Port name can be changed here
BroadR-Reach® mode
: You can change here the Master/Slave Configuration of Host
Port
Keep Awake Reason Bus
:
This port is supervised. If on this port is communication, CM_100_High
can’t go
asleep.
This port is not supervised. The Capture Module can fall asleep even there is
communication on this port.
