CM 100 High
User Manual
20
4.3.2
IP addresses
The IP address can be changed in the field as shown in
Figure 4-4: IP-addresses
There are two possibilities to get access to the device:
•
Access by 100BASE-T1 port of the power connector at the frontside
•
Access by the GB-Port which is activated as configuration port. By default, it is
GB-A
Controller IP address
: This is the IP address you get access to the Webserver by the
100BASE-T1 port. This IP-address can be changed here. Please type the new IP-
addre
ss in the field. After leaving the focus of this field or pressing “Enter” you can
save the changes.
