CM 100 High
User Manual
16
3
ACCESS BY WEBSERVER
You can get access to the Webserver by connecting the device via the GB A Port (RJ-
45) to your PC. Here the IP-address of the device is dependent on the status of the
rotary switch (see
C
Or you get access to the Webserver by the 100BASE-T1 Port to the Microcontroller and
the default IP address 192.168.0.49. This port is configured as 100BASE-T1-slave as
default.
1.
Please go to the network adapter settings and adjust the IP in the same range of
your
CM_100_High,
dependent on which port you are connected to.
Note:
Please make sure that the Internet Protocol Version 6 (TCP/IPv6) option is
disabled.
2.
Enter the IP Address in your standard web browser. For details see
C
HAPTER
and
C
Note:
Firefox is the recommended browser.
3.
The following website should appear.
Figure 3-1: Home Screen CM_100_High
