CM 100 High
User Manual
46
The BR4B-port is configured as follows:
Here, the important point is the field
IP for
Injection.
It must be the IP-Address of the
DUT_2. Of course the Box
Enable Injection for
this port
must be checked and the
Maximal
delay (bytes) for Injection
must be filled out
(512, 1024 or max. 1536).
If you have enabled the PLP Header for logging ports (see
C
) a filter is
needed (see
C
):
For this example, the filter looks like this:
The Filter must remove the PLP-header, if
the used protocol is bidirectional like for
example TCP.
Figure 4-28: Filter of our example for IP
Injection
Figure 4-27: Example for IP Injection
