CM 100 High
User Manual
36
Field
: Here you can define, what you want to filter:
Field: no specific value, it must be changed
Destination MAC:
XX:XX:XX:XX:XX
Source MAC:
XX:XX:XX:XX:XX
Outer VLAN:
XXX[hex]
Inner VLAN:
XXX[hex]
Ethernet Type: [2 bytes]:
XXXX[hex]
IP-Msg Src IPv4:
XXX.XXX.XXX.XXX
IP-Msg Dest IPv4:
XXX.XXX.XXX.XXX
Source UDP Port:
XXXX[hex]
Destination UDP Port:
XXXX[hex]
ARP Sender IP:
XXX.XXX.XXX.XXX
ARP Target IP:
XXX.XXX.XXX.XXX
Subtype AVTP [1 bye]:
XX[hex]
Stream ID AVTP [8 bytes]:
XXXXXXXXXXXXXXXX[hex]
Value
: Here you define the value of your
Field
. Allowed values depend on the chosen
Field
.
How to use Advance Filter:
Please see
C
