10. Troubleshooting
156
Instructions for Use for
infinite® 200
No. 30017581 Rev. No. 1.4
2008-07
Error #
Error Text
Description
17
z drive init error
Hardware Failure z-drive Module. Please report this error to
your local Tecan customer support office.
18
Injector A not available
Hardware Failure Injector A. Please report this error to your
local Tecan customer support office.
19
Injector B not available
Hardware Failure Injector A. Please report this error to your
local Tecan customer support office.
20
Injector Init Error:
Hardware failure Injector Module. Please report this error to
your local Tecan customer support office.
21
Invalid Command: [cmd]
Unspecific internal communication error. Please report this
error to your local Tecan customer support office.
22
Invalid Operand: [cmd]
Unspecific internal communication error. Please report this
error to your local Tecan customer support office.
23
Invalid Command Sequence:
[cmd]
Unspecific internal communication error. Please report this
error to your local Tecan customer support office.
24 N/A
N/A
25
Injector not init.: [cmd]
Unspecific internal communication error. Please report this
error to your local Tecan customer support office.
26
Plunger Overload:
Unspecific internal communication error. Please report this
error to your local Tecan customer support office.
27
Valve Overload:
Unspecific internal communication error. Please report this
error to your local Tecan customer support office.
28
Plunger Move not allowed:
Unspecific internal communication error. Please report this
error to your local Tecan customer support office.
29
Command Overflow
Unspecific internal communication error. Please report this
error to your local Tecan customer support office.
30
Prepare: [s]: Gain:[g], Counts:
[cts]
Unspecific Hardware failure. Please report this error to your
local Tecan customer support office.
31
[ERR] at module [mod]
(cmd:[cmd])
Unspecific Hardware failure. Please report this error to your
local Tecan customer support office.
32
"MTP is in Out-Position",
Unspecific error in the Instrument - Computer communication
protocol. Please report this error to your local Tecan
customer support office.
33
[val] ... not set at (Ratiolabel
[n])
Unspecific error in the Instrument - Computer communication
protocol. Please report this error to your local Tecan
customer support office.
34
Injectors are not enabled
Unspecific error in the Instrument - Computer communication
protocol. Please report this error to your local Tecan
customer support office.
35
Invalid Parameter Length (max:
[n] char allowed)
Unspecific error in the Instrument - Computer communication
protocol. Please report this error to your local Tecan
customer support office.
36
Checksum Error
Communication Error on USB interface. Please report this
error to your local customer support office.
37
Init Error at module [mod#]
Unspecific Hardware Failure. Please report this error to your
local Tecan customer support office.
