2-33
2. MAIN UNIT REPLACEMENT
EO18-33014
* Details of checked contents are as described in Section 2.6 TEST PRINT. Especially, the destination
(“TYPE” on the printouts) must be correctly set. Loop back check (“LOOP” on the printouts) for each
interface must be OK. The optional device (“OP.” on the printouts) must match the model.
NOTE: The special jig is required for the loop back check for B-SP2D-GH20 (RS). If it is not used, the
check will result in NG.
For B-SP2D-GH30, the Bluetooth device address must be printed for the optional device (“OP.”
on the printouts).
2.7 SETTING AND ADJUSTMENT
