TC Electronic REVERB 4000, User Manual

Page: 8 / 61

6
FRONT PANEL OVERVIEW
POWER On/Off
Switches power On/Off.
To completely disconnect from
mains the Rear panel POWER
switch must be used.
The Reverb 4000 auto sensing
power supply accepts 110 to
240V.
PCMCIA slot
For software updates and
preset backups.
OVERLOAD LED
Indicates internal overload.
Decrease Input level to
compensate. The LED must
never be lit.
96/88.2/48/44.1kHz LEDs
Indicates current Sample
Rate.
DIGITAL IN LED
Indicates that a digital Input is
selected.
MIDI LED
Indicates incoming MIDI
information.
EDITED LED
Indicates that the currently
recalled preset has been
edited but not yet stored.
LEVEL METERS
Shows the current Input level.
DISPLAY
The display is divided into two
sections:
The Upper section is dedicated
to essential information/
operation, such as Recall, Store
and Wizard functions plus I/O
and Utility.
These functions are controlled
via the keys in the Program and
Control section on the front panel.
The lower section of the display
always indicates preset
parameters and values. The
three Default parameters are
Pre Delay, Decay and Hi Decay.
Pressing the HOME key will
always return to these three
parameters.
You scroll down through
additional parameters using the
UP/DOWN keys and set their
values using the three dedicated
value wheels F1, F2 and F3.
HOME- key
Returns to the first line in the
parameter list showing the three
key parameters:
PreDelay, Decay and Hi Decay.
CURSOR UP/DOWN keys
Scroll up and down in effect
parameters.