TC Electronic REVERB 4000, User Manual

Page: 17 / 61

15
STORE & DELETE -
FRONT PANEL OPERATION
Basics
Use the UP/DOWN keys to select function and
the ADJUST wheel to set values
• Select Mode - Overwrite/Delete.
• Select Location - where to store.
• Set/Change name.
Mode
Select between Overwrite and Delete.
Overwrite:
Standard storing method. The preset at the
location where you attempt to store will be
overwritten.
Delete:
Use this function to delete presets without
storing a new one at the same time.
Consider this a “Clean-up” function.
Locat. - Location
Select a user location where you wish to store
the preset.
The Reverb 4000 itself has 100 user locations.
With a standard PCMCIA card an additional
100 presets can be stored.
(If used in conjunction with a TC Icon PC Editor
an unlimited number of presets can be stored
on your computers hard drive).
Name
To enter or alter a preset name during storing
procedure:
• Set cursor at the “Name-line”.
• Use ADJUST wheel to change letter.
• Use ARROW UP/DOWN to jump between
letter positions.
• Press ENTER to store and confirm.
To enter the Reverb 4000 Store mode press STORE
Storing Location
Name/Rename
Parameters &
current values
Function
Storing Mode