TC Electronic REVERB 4000, User Manual

Page: 16 / 61

14
RECALL WIZARD -
FRONT PANEL OPERATION
There are three types of selections to make.
In any of the three types you can select “ALL”
if you do not want to limit the selection.
Basics
Use the UP/DOWN keys to select function and
the ADJUST wheel to set values.
• Enter the Wizard bank from the Recall
display using the UP/DOWN keys in the
Control section.
• Press WIZARD and select Size, Source and
Origin (see below).
• Then press WIZARD or RECALL to go back
to the RECALL Display.
• Now select preset from the limited list
appearing based on the WIZARD selections.
Size
Defining the size of a specific Reverb type is a
delicate issue. Altering Decay times
considerably on a defined room-size is not
equivalent to changing the size of the room. We
suggest selecting Size according to
application.
Options
Source
In the select list you set for which specific
application you are looking for a preset.
Options
Origin
All of the presets in the Reverb 4000 derive
from other top quality Reverb processors by TC
Electronic.
Options
• Then press RECALL or WIZARD to go to the
Wizard Bank.
The Recall Wizard is a dedicated filter to assist you in making the appropriate preset
selection for your application. Enter the Wizard by pressing the WIZARD key.
Origin
Source
Size
Parameters &
current values
Category Filter
Function