TC Electronic REVERB 4000, User Manual

Page: 56 / 61

54
APPENDIX
- TECHNICAL SPECIFICATIONS
Digital Inputs and Outputs
Connectors:
Formats:
Output Dither:
Word Clock Input:
Sample Rates:
Processing Delay:
Frequency Response DIO:
Analog Inputs
Connectors:
Impedance:
Max. Input Level:
Min. Input Level (for 0 dBFS):
Sensitivity:
A to D Conversion:
A to D Delay:
Dynamic Range:
THD:
Frequency Response:
Crosstalk:
Analog Outputs
Connectors:
Impedance:
Max. Output Level:
Full Scale Output Range:
D to A Conversion:
D to A Delay:
Dynamic Range:
THD:
Frequency Response:
Crosstalk:
EMC
Complies with:
Safety
Certified to:
XLR (AES/EBU)
RCA Phono (S/PDIF)
Optical (Tos-link, ADAT)
AES/EBU (24 bit),
S/PDIF (24 bit), EIAJ CP-340, IEC 958,
EIAJ Optical (Tos-link),
ADAT Lite pipe (24 bit)
HPF/TPDF dither 8-20 bit, independent dithered output
RCA Phono, 75 ohm, 0.6 to 10 Vpp
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0.2 ms @ 48 kHz
DC to 23.9 kHz ± 0.01 dB @ 48 kHz
DC to 47.9 kHz ± 0.01 dB @ 96 kHz
XLR balanced (pin 2 hot)
20 Kohm
+22 dBu (balanced)
-10 dBu
@ 12 dB headroom: -22 dBu to +10 dBu
24 bit (6.144 MHz delta sigma @ 48/96 kHz)
0.8 ms @ 48 kHz, 0.4 ms @ 96 kHz.
>103 dB (unweighted, BW = 22 kHz), >106 dB(A)
-95 dB (0,0018 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
10 Hz to 20 kHz : +0/-0.2 dB @ 48 kHz
10 Hz to 45 kHz : +0/-1 dB @ 96 kHz
<-80 dB, 10 Hz to 20 kHz
typical –100 dB @ 1 kHz
XLR balanced (pin 2 hot)
100 ohm (active transformer)
+22 dBu (balanced)
-10 dBu to +22 dBu
24 bit (6.144 MHz delta sigma @ 48/96 kHz)
0.57 ms @ 48 kHz, 0.28 ms @ 96 kHz
>+100 dB (unweighted, BW = 22KHz), >+104 dB(A)
-82 dB (0.008 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
10 Hz to 20 kHz : +0/-0.5 dB @ 48 kHz
10 Hz to 45 kHz : +0/-3 dB @ 96 kHz
<-60 dB, 10 Hz to 20 kHz
typical –90 dB @ 1 kHz
EN 55103-1 and EN 55103-2
FCC part 15, Class B
CISPR 22, Class B
IEC 60065, EN 60065, UL 6500 and
CSA E65, CSA File#LR108093
Due to continuous development these specifications are subject to change without notice.