TC Electronic REVERB 4000, User Manual

Page: 13 / 61

11
TYPICAL SETUPS
Reverb 4000 Digital Setup
It is assumed that the TC Icon software is
correctly installed on you computer. Page
20 describes installation procedure.
Connections
• Connect the Reverb 4000 to a free USB port
on your computer using a standard USB
cable (supplied).
This connection ensures communication with
the TC Icon Software Editor.
• Open the TC Icon Editor and select
appropriate port on the Setup-Devices -Port
page.
• Connect MIDI In/Out - if needed
• Connect digital audio to your Workstation
using correct cables.
Setting up
• In the I/O menu - setup following:
- Input Select : Digital
- Digital In Sel : Digital Input Type
- Input Channel: Stereo, Left or Right
- Clock Select : 44.1/88.2 - 48/96
Clock mode dependent.
- Optical In/Out settings if optical I/O is
selected.