TC Electronic REVERB 4000, User Manual

Page: 33 / 61

31
SYSTEM -
MAP PAGE
MIDI MAP page
This is a “MIDI Custom Program Map page”,
where you can customize how the Reverb 4000
should map incoming program changes.
First of all the general MIDI settings must be
set up at the MIDI page. (see previous page)
Setting up the Custom Map:
• Use the slider to select which incoming
program change to MAP.
• Select which bank to map to using the BANK
SELECT arrows.
• Use the PRESET SELECT arrows to select
which preset in the selected bank to map to.
Fill From Current
This is a convenient function you may choose
to use when creating a “map to” list.
Example:
001 mapped to 001
002 mapped to 002
003 mapped to 003
----
----
025 mapped to 201
• Press Fill From Current
- Then:
026 mapped to 202
027 mapped to 203
028 mapped to 204
etc.
Reset All
Resets all MIDI mappings.
When Reset - incoming MIDI prg. ch. 01 will
map to preset 1 in Bank 1 (Halls) and MIDI prg
ch. 02 will map to preset 2 in Bank 1 etc.
Read Sys Ex
Select On/Off
Send Sys Ex
Select On/Off
Preset Dump
Dump System
Complete Bulk Dump to MIDI Out that includes
all settings.
Dump Engine
Partial MIDI Bulk dump to MIDI Out that only
dumps currently loaded Engine preset.