TC Electronic REVERB 4000, User Manual

Page: 47 / 61

45
NONLIN-2
Levels
Dry Level
Range: Off - 0dB
Adjusts the dry signal level passed through the
Engine. For a typical send/return configuration,
leave Dry level off.
Wet Level
Range: Off - 0dB
Adjusts the wet Output level.
Filter
LoCut
Range: 20Hz to 20kHz
Lo Cut on the Reverb Input.
Hi Cut
Range: 20Hz to 20kHz
Hi cut on the Reverb Input.
Twist
Type
Selects which type of funky effect treatment to
be used on the reverb. Twist Type should be
regarded as a spice capable of sparking
imagination in the mix process. Try the effect
on all sorts of different sources to add character
or make them stand out. If spectral shaping
using the Twist parameters gets out of control,
the Lo and Hi cuts can be used to stay within
limits.
When the Twist Ratio is set at 0%, Twist
Type has no effect.
Ratio
Range: 0 - 100%
Applies the selected amount of "Twist" to the
Reverb.
When the Twist Ratio is set at 0%, Twist
Type has no effect.
Width
Width
Range: 0 - 100%
Adjusts the Output Stereo Width. 0% denotes
mono, while 100% is max width.
The Reverb Style and Diffuse parameters
also affect the perceived width of the
effect. Width difference between Styles is
most obvious at low Diffuse Ratios.
Level Page
In the Reverb 4000 user interface the
parameters of this algorithm are organized
as follows.
Home
ATTACK
MIDI CC:
22/54 (DP)
76 (SP)
Levels
Reverb
LOCUT
WIDTH
PREDEL
Twist
TYPE
HOLD
MIDI CC:
23/55 (DP)
77 (SP)
WET
STYLE
RATIO
RELEASE
MIDI CC:
24/56 (DP)
78
(SP)
DRY
HICUT
DIFFUSE
(SP) : Single Precision
(DP) : Double Precision