tbs electronics TBS 500, Installation, Operating And Maintenance Instructions

Page: 6 / 56

6 02.2006 TR10B005 RE
TABLE OF CONTENTS PAGE
A Supplied Items 2
B Required Tools for Installation 2
1 IMPORTANT NOTES 7
1.1 Important safety instructions 7
1.1.1 Warranty 7
1.1.2 Checking the door / door system 7
1.2 Important instructions for safe installation 7
1.2.1 Before installing the garage door operator 7
1.3 Warnings 8
1.4 Maintenance advice 8
1.5 Information on the illustrated section 8
Illustrated Section 12-26
2 DEFINITIONS 36
3 PREPARING FOR INSTALLATION 36
3.1 Required clearance for installing the operator 36
3.1.1 Before installing the boom 36
3.1.2 Boom operating modes 36
3.1.3 Manual operation 36
3.1.4 Automatic operation 37
3.2 Installing the garage door operator 37
3.2.1 Centrally positioned lock on a sectional door 37
3.2.2 Off-centred reinforcement profile on a sectional door 37
3.2.3 Tensioning the toothed belt
37
3.2.4 Establishing the door's end-of-travel positions
by installing the limit stops 37
3.3 Electrical connection 37
3.3.1 Connecting additional components 38
3.3.2 Connecting external IMPULSE buttons
to start or stop travel cycles 38
3.3.3 Connecting an additional external radio receiver 38
3.3.4 Connecting a 2-wire photocell 38
3.3.5 Connecting a wicket door contact 38
3.3.6 Connecting the options relay PR 1 38
3.3.7 Emergency accumulator 38
4 PUTTING THE OPERATOR INTO SERVICE 38
4.1 Preparation 38
4.2 Deleting the door data 38
4.3 Learning cycles 38
4.4 Setting the forces 39
4.5 Radio receiver 39
4.5.1 Integral radio module 39
4.5.2 Connecting an external radio receiver 39
4.5.3 Deleting the data of the internal radio module 39
4.6 Setting the DIL-switches 39
4.6.1 Automatic timer 39
4.6.2 CLOSE end-of-travel signalling
DIL -switch A
➜
OFF / DIL -switch B
➜
ON 40
4.6.3 Advance warning phase
DIL -switch A ➜ ON / DIL -switch B ➜ OFF 40
4.6.4 External lighting
DIL -switch A ➜ OFF / DIL -switch B ➜ OFF 40
4.6.5 Door type
DIL -switch C 40
4.6.6 Photocell
DIL -switch D 40
4.6.7 Stop / static current circuit with self-monitoring
DIL -switch E 40
4.6.8 Door maintenance indication
DIL -switch F 40
5 USING THE GARAGE DOOR OPERATOR 40
5.1 Normal operation 40
5.2 Power failure backup with the emergency
accumulator
41
5.3 Operation after actuating the mechanical release 41
6 CHANGING THE LIGHT BULB 41
7 SIGNALS FROM OPERATOR LIGHTING
WHEN MAINS POWER ON
41
8 ERROR MESSAGES 41
9 DISMANTLING 42
10 OPTIONAL ACCESSORIES
(NOT INCLUDED IN THE SCOPE OF SUPPLY)
42
11 TERMS AND CONDITIONS OF THE WARRANTY 42
12 TECHNICAL DATA 42
E N G L I S H