manualshive.com logo in svg

Taylor 810 Series, Original Service Instructions

Share
Download
Taylor 810 Series Original Service Instructions Download Page 71

TROUBLESHOOTING

3-13 

Model 810, 812, 820, 822, 828 Series 

Troubleshooting 

3

Meat Quality Troubleshooting

The product served from the grills is the result of cook times, temperatures, pressures, and operations. Use the 
following chart to troubleshoot poor meat quality and to educate the operator.

Table 3-3

Problem

Probable Cause

Remedy

1. Undercooked.

a. Freezer burn.

a. Use fresh product.

b. Worn release material sheet.

b. Rotate the release sheets daily and replace the release 

sheets when worn.

c. Improper cook times.

c. Set the time as instructed in the Operator's Manual.

d. Improper cook temperatures.

d. Set proper temperatures and calibrate the grill.

2. Overcooked.

a. Incorrect cook times.

a. Set time as instructed in the Operator's Manual.

b. Improper meat removal.

b. Remove meat as instructed in the Operator's Manual.

c. Improper cook temperatures.

c. Set proper temperatures and calibrate the grill.

3. Improper sear.

a. Worn release material sheet.

a. Rotate the release sheets daily and replace the release 

sheets when worn.

Summary of Contents for 810 Series

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands