Taylor 810 Series Original Service Instructions Download | Manualshive

Page: 6 / 208

background image

1-2

INTRODUCTION

Model 810, 812, 820, 822, 828 Series

Introduction

1

Safety

We at Taylor Company are deeply committed to
manufacturing safe operating and serviceable machines.
The many built-in safety features that are part of all
Taylor machines are aimed at protecting operators and
trained service technicians alike.

NOTICE!

This manual is intended exclusively

for authorized Taylor service personnel

.

NOTICE! DO NOT

operate the machine before

reading the Operator's Manual. Failure to follow this
instruction may result in machine damage, poor machine
performance, health hazards, or personal injury.

IMPORTANT!

In all areas of the world, the

machine should be installed in accordance with existing
local codes. Please contact your local authorities if you
have any questions.

Care should be taken to ensure that all basic safety
practices are followed during the installation and
servicing activities related to the installation and service

of Taylor

®

machines.

•

Only authorized Taylor service personnel should

perform installation, maintenance, and repairs
on Taylor machines.

•

Authorized service personnel should consult

OSHA Standard 29CFRI910.147 or the
applicable code of the local area for the industry
standards on lockout/tagout procedures before
beginning any installation or repairs.

•

Authorized service personnel must ensure that

the proper personal protective equipment (PPE)
is available and worn when required during
installation and service.

•

Authorized service personnel must remove all

metal jewelry, rings, and watches before
working on electrical equipment.

WARNING!

Take caution to protect eyes,

lungs, and all parts of the body from potential harm when
using any chemical cleaner. Failure to follow this
instruction may result in a chemical burn.

CAUTION!

Use extreme caution

while setting

up, operating, and cleaning the machine to avoid coming
in contact with hot grill surfaces or with hot grease.
Failure to comply may result in burn injuries.

WARNING!

This machine must be properly

grounded!

DO NOT

operate this machine unless it is

properly grounded and all service panels and access
doors are restrained with screws. Failure to do so can
result in severe personal injury from electrical shock!

WARNING!

Avoid injury.

•

DO NOT

operate the machine with larger fuses

than specified on the data label.

•

DO NOT

attempt any repairs unless the power

supply to the machine has been disconnected.

Failure to follow these instructions may result in severe
personal injury from electrical shock.

WARNING!

This machine has many sharp

edges that can cause severe injuries.

WARNING!

This machine must

NOT

be

installed in an area where a water jet or hose can be
used.

NEVER

use a water jet or hose to rinse or clean

this machine. Using a water jet or hose on or around this
equipment may result in the electrocution of the user or
damage to the equipment.

«
...
4
5
6
7
8
...
»

Summary of Contents for 810 Series

















































































































































































































Reviews:

No comments

Related manuals for 810 Series

Brand: Rational Pages: 100

Brand: Universal Tool Pages: 8

Brand: Atlas Copco Pages: 60

Brand: Ryobi Pages: 8

Brand: HOMCOM Pages: 6

Brand: Napoleon Pages: 3

DH Woody LX 4 Series

Brand: Campingaz Pages: 29

Masterpro BGMP-9146

Brand: Carlo Cracco Pages: 91

Brand: GardenGrill Pages: 42

OPTIGRILL GC705D16

Brand: TEFAL Pages: 112

Brand: Lux Tools Pages: 124

Brand: Porter-Cable Pages: 40

Brand: Truper Pages: 20

Brand: Avantco Equipment Pages: 8

Brand: Blue Seal Pages: 18

Brand: Hilti Pages: 60

Brand: Klarstein Pages: 36

Brand: Klarstein Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands