10
RX7
+
Do not leave any tools and packaging materials like plastic sheeting laying around
to avoid danger of suffocation for children.
+
Assemble the equipment on an underlay mat or on the cardboard packaging in
order to avoid damage to the equipment and to the floor (scratches).
+
Before starting assembly, all individual parts should be placed on the floor next to
each other.
+
Read the assembly instructions carefully and assemble the equipment according
to the illustrations. Proceed carefully and cautiously.
+
First loosen all parts and check for their correct fitting. Then tighten the screws
using a tool.
+
Modifications to the design or improper repairs may pose a hazard to the user and
should not be carried out. The product warranty may be void as a result.
+
Only authorized service technicians are permitted to carry out all servicing and/or
repairs – it excludes maintenance and care.
+
Damaged or worn components may impair your safety and the lifespan of
the equipment. You should therefore immediately replace damaged or worn
components. Please contact your contract partner in such a case. The equipment
should no longer be used until it has been repaired. When needed, only use
original Taurus spare parts.
+
Check the tightness of all screw connections once a month.
+
In order to be able to guarantee the constructively defined safety level of this
equipment, we recommend having the equipment regularly maintained (at least
once a year) by specialists (service technicians of your contract partner).
+
The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The
use of solvents should be strictly avoided. Also, make sure that no liquids (e. g.
sweat) get into the openings of the equipment (e. g. console).
+
It is recommended to have a safety check before each training session and to examine
the equipment for wear or damage. If you determine damaged or defective parts,
the equipment should not be used until it is repaired. Please contact the contract
partner for the repair.
+
Manufacturer note:
The pull strap is equipped with a return spring so that the
pull strap is automatically wound up again. The return spring is equipped with the
lowest possible power. The reason for the light return spring is to give the user a
better training effect for the rear thigh muscles. These muscles are stressed when
the user moves the seat forward. If the return power is strong, the person using the
equipment would be pulled.
Summary of Contents for TF-RX7-2
