Taurus TF-RX7-2, Assembly And Operating Instructions Manual

Page: 14 / 80

14
RX7
3.2 Assembly manual
Before starting assembly, look carefully through the individual assembly steps shown
and assemble the equipment in the order indicated.
Step 1:
Before you unpack the RX7 rowing machine, make sure that you have a work space
of 2m x 2.5 m.
Step 2:
Open the box as shown in the
figure below.
NOTE:
In order to protect the RX7
rowing machine from damage as
long as possible, you should only
remove the protective packaging
when it is necessary.
Step 3:
a) Place the frame [002] in the
carton lid as shown in the image on
the right.
b) Loosen the four pre-mounted
screws [300] from the frame [002].
c) Mount the front supporting foot
[005] as in the illustration with the
previously loosened screws [300]
and tighten them..