Taurus TF-RX7-2, Assembly And Operating Instructions Manual

Page: 9 / 80

9
RX7
+ A floor protective mat / equipment underlay can help to protect high-quality floor
coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to
level out slight unevenness.
+ Choose a location in which to place the equipment such that there is enough free
space/clearance to the front, the rear and to the sides of the equipment. Make
sure that you leave at least 30 cm on each side of the equipment and at least 15
cm in front of and behind the equipment as a training zone. This is the minimum
required area in order to safely use the equipment.
The recommended free zone around the equipment should be at least 60 cm on
each side and 45 cm in front of and behind the equipment.
Furthermore, the equipment should not be set up in main entrances or on escape
routes.
2 ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE
2.1 General instructions
+ Please check if all parts and tools belonging to the equipment are included in the
delivery and if there is any transport damage. If there are any complaints, please
contact your contract partner directly.
+ Some of the nuts and bolts to be used in assembly are already pre-mounted in
order to make set-up as easy as possible.
+ The equipment must be assembled by adults. In case of doubt, ask for assistance
from another person with technical skills.
+ Keep children away from the equipment during assembly, because small parts are
included in the delivery and may be swallowed.
+ Make sure that you have enough space (at least 1.50 m) in every direction during
assembly.