Taurus TF-RX7-2, Assembly And Operating Instructions Manual

Page: 15 / 80

15
RX7
Step 4:
a) For the next step, turn the frame as shown in the figure.
b) Remove the safety belt and dispose of it. Place the handle in the appropriate holder.
c) Loosen the four pre-mounted screws (300) from the frame (002) with the included
tool.
d) Mount the two foot
supports [013 & 014]
with the previously
loosened four screws
[300] and tighten them.
Step 5:
a) Remove the rail [001] from the carton and place it on the carton lid as in the figure
below.
b) Loosen the four screws [300] from the rail [001] and the two screws [302] from the
rear supporting foot [006] with the included tool.
c) Mount the rear supporting foot
[006] with the previously loosened
four screws [300] and tighten them.
d) Mount the cover cap for the rail
[116] with the two screws [302] and
tighten them.
e) Remove the binding wire.