TATU PHT FLEX Operator'S Manual Download Page 8 | Manualshive

Page: 8 / 58

background image

6

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PHT FLEX

To the operator

• Only trained and qualified personnel are allowed to operate the equipment.
• While working or during transportation, only the presence of the operator is

allowed on the tractor.

• Do not allow children to play or to get over the equipment, while it is operating,

during transportation or storage.

• Have full knowledge of the soil before starting to work. Use the speed which is

suitable to the conditions of the ground or pathways to be covered. Provide the

delineation of obstacles or hazardous locations.

• Use personal protective equipment (PPE).
• Wear appropriate clothes and footwear. Avoid clothes that are either loose or

hanging from the body, which may become entangled in moving parts.

• Never operate the equipment without its

protective devices

.

• Be careful while hitching the equipment to the tractor.
• Wear protective gloves to work near the cutting parts.
• When lifting or lowering the equipment, check if there are no people or animals

close or under it.

• Never attempt to change the adjustments, clean or lubricate the equipment while

it is moving.

• In case of emergency, know how to stop the tractor and planter quickly.
• Always shut down the engine, remove the key and use the handbrake before

leaving the tractor seat.

• Only pull the equipment using a tractor with appropriate power.
• Carefully check the transport width on narrow locations.
• Do not drive the equipment under the influence of alcohol or any soothing/

stimulating medicine, as it may result in a serious accident.

• Do not allow that any people or animal get under the equipment at any time.
• In case of a fire outbreak or any possible hazard, the operator must leave the

area as fast as possible and look for a safe place. Always have emergency

numbers at hands.

• Whenever you unhitch the equipment, either in the field or shed, do it on a flat

and firm surface and use parking jacks. Make sure the equipment is properly

supported.

• We suggest that you carefully read the manual, as it will be a guide for periodic

verifications that need to be done and will allow that you assure the maintenance

of your equipment.

• If there is any doubt after reading it, ask your dealer. For more complicated

operations, there will be the right person to help you there.

• Please check the general safety instructions on the back cover of this manual.

«
...
6
7
8
9
10
...
»

Summary of Contents for PHT FLEX



























































Reviews:

No comments

Related manuals for PHT FLEX

Brand: GE Pages: 14

Brand: GE Pages: 11

Brand: GE Pages: 20

Druck ADTS 2 Series

Brand: GE Pages: 18

Brand: Panasonic Pages: 174

Brand: Quadro Pages: 11

Precision2 HP2 Series

Brand: B-K lighting Pages: 6

Brand: Zero Hand Truck Pages: 38

Brand: B-K lighting Pages: 3

Brand: Jacto Pages: 12

Brand: NatureZap Pages: 2

ProFire Lightbridge

Brand: M-Audio Pages: 8

Brand: M-Audio Pages: 36

Brand: Velp Scientifica Pages: 16

Brand: Velp Scientifica Pages: 2

Brand: Velp Scientifica Pages: 32

Brand: Velleman-Kit Pages: 32

Brand: M-Audio Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands