TATU PHT FLEX Operator'S Manual Download Page 30

Page: 30 / 58

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PHT FLEX

The amount and size of the holes/slots and the thickness of the seed plates can vary

according to the grain size and the desired plant amount.

Adjust the seed rate per linear meter through the sprocket combinations of the Drive

shaft

{A}

(14, 18, 22, 26, 30, 34 and 38 teeth) and Driven shaft

{B}

(14, 18, 22, 26, 30, 34

and 38 teeth).

Adjustments and operations

Remove the cover (C) from

the wheelset arm by loosening

the butterfly nuts, flat and spring

washers.

Move the lever (D) to relieve

the chain tightener and lock it using

a pin.

Change the sprockets from

the drive (A) and driven (B) shafts

by removing the elastic pins if

necessary.

Release the lever to loose the

lock pin.

• The following pages show the different amount of seeds distributed

to many crops, according to the sprocket combinations.

• The correct seed plate matching to the used seeds is very important.
• Never combine seeds of different sizes.
• The seed and fertilizer distribution tables in this manual must be used

as a reference to start the planter adjustment.

• Factors such as the slippage index of the planter wheels (skidding),

working speed, tire inflation, field conditions, seed type and others

can make the values differ from the ones in the table. Therefore, it is

always indispensable to check the 'Practical test of seeds and fertilizer

distribution' page ('Adjustments and operations' section).

IMPORTANT

Procedures to change the sprocket

Seeds distribution

Transport

position

Working

position

• Never work with the pin (E) on transport position in order to not damage the

equipment.

NOTE

Summary of Contents for PHT FLEX



























































Search results

Summary of Contents for PHT FLEX

Reviews:

Related manuals for PHT FLEX

Brands by name

Popular brands

TATU PHT FLEX, Operator'S Manual

Search results

Summary of Contents for PHT FLEX

Reviews:

Related manuals for PHT FLEX

Brands by name

Popular brands