TATU PHT FLEX Operator'S Manual Download Page 50

Page: 50 / 58

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PHT FLEX

Maintenance

It is necessary to make a general

cleaning on the seed system daily. To do

this, remove the seed plate and observe the

metering mechanism operation. By doing

so, the best planting will be assured.

When using graphite powder

with treated/inoculated seeds, it

is necessary to clean the system

twice a day.

Cleaning the seed metering

Maintenance of the row hubs

NOTE

• When the existence of looseness is noticed, it is

necessary to make the maintenance in the hubs of the disc

blades, unaligned double discs, gauge wheels and press

wheels.

• Disassemble the hubs and remove the internal

components.

• Clean all parts with diesel oil.

• Verify the existence of looseness and the conditions

of bearings, retainers and bushings. Replace the damaged

components or with excessive wearing.

• The hubs without grease fittings should be reassembled

with a good amount of lubricant.

• The hubs should rotate with the hand applying a small

effort.

• Whenever replacing the bearings, it will be necessary to change the sealing

rings and o' rings.

• Fill up the hub with grease and cover it with the cap (A) using the elastic ring.

NOTE

Summary of Contents for PHT FLEX



























































Search results

Summary of Contents for PHT FLEX

Reviews:

Related manuals for PHT FLEX

Brands by name

Popular brands

TATU PHT FLEX, Operator'S Manual

Search results

Summary of Contents for PHT FLEX

Reviews:

Related manuals for PHT FLEX

Brands by name

Popular brands