TATU PHT FLEX Operator'S Manual Download Page 33

Page: 33 / 58

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PHT FLEX

Fertilizer distribution

Adjust the seed rate per linear meter through the sprocket combinations of the Drive

shaft

{A}

(14, 18, 22, 26, 30, 34 and 38 teeth) and Driven shaft

{B}

(14, 18, 22, 26, 30, 34

and 38 teeth).

Procedures to change the sprocket

Adjustments and operations

• See the different amounts of fertilizer distributed for several spacings,

according to the sprocket combinations.

• The fertilizer distribution tables of this manual must be used as a

reference to start the planter adjustment.

• Factors such as the slippage index of the planter wheels (skidding),

working speed, tire inflation, field conditions, seed type and others

can make the values differ from the ones in the table. Therefore, it is

always indispensable to check the 'Practical test of seeds and fertilizer

distribution' page ('Adjustments and operations' section).

IMPORTANT

• Never let the pin (E)

on transport position

during working, as this

may cause damages

to the equipment.

NOTE

Working

position

Transport

position

Remove the cover (A) from the wheelset arm by loosening the butterfly nut, flat and

spring washers.

Move the lever (B) to relieve the chain tightener and lock it using a pin.

Change the sprockets from the drive (C)

and driven (D) shafts by removing the elastic

pins if necessary.

Release the lever to loose the lock pin.

Summary of Contents for PHT FLEX



























































Search results

Summary of Contents for PHT FLEX

Reviews:

Related manuals for PHT FLEX

Brands by name

Popular brands

TATU PHT FLEX, Operator'S Manual

Search results

Summary of Contents for PHT FLEX

Reviews:

Related manuals for PHT FLEX

Brands by name

Popular brands