TATA Motors nano genX Owner'S Manual Download Page 54

Page: 54 / 156

FRONT HOOD OPENING/CLOSING

AN OVERVIEW

Opening the front hood :

Ensure that the vehicle is in neutral
gear with the parking brake applied.

To open the hood pull the hood
release lever located under the right
hand corner of the dashboard inside
vehicle. The hood will pop up
slightly.

Location of hood release lever

Lift the hood slightly and slide the
secondary lock lever located under
the hood centre.

Lift the hood up. Pull the hood stay
rod from its clip & insert the free end
into the slot in the hood, slide stay
rod outward to secure.

Closing :

1. To close the hood disengage the

stay rod and clamp it properly.

2. Lower the hood and drop it from

a short height to lock.

CAUTION

Make sure the bonnet is properly
locked and latched before driving.
If it is not, it can fly up unexpectedly
during driving, obstructing your
view and resulting in an accident.

Stay Rod

Summary of Contents for nano genX





























































































































































Search results

Summary of Contents for nano genX

Reviews:

Related manuals for nano genX

Brands by name

Popular brands

TATA Motors nano genX, Owner'S Manual

Search results

Summary of Contents for nano genX

Reviews:

Related manuals for nano genX

Brands by name

Popular brands