TATA Motors nano genX, Owner'S Manual

Page: 144 / 156

142
to return to the previous active
source. During A2DP mode
following button presses will be
considered as valid: Next Track/
Previous track, Mute/Unmute,
Volume up/down, Call Accept & Call
Reject. Rest of the button presses
will be ignored by the system.
The user is required to come out of
the BT mode by the short press of
REJECT button to access the
SRC button.
9.4. Exiting BT Mode
User can abort the BT mode and
make the radio revert back to
previous mode (tuner, CD, USB,
AUX) via a short press of
REJECT button.
9.5. BT De-Pairing
•
When in BT mode, short press
of
REJECT button to come
out of the BT mode to the last
selected mode (tuner, CD, USB,
AUX).
•
A long press on the REJECT
button will de-pair the existing
phone. For successful deletion,
the display will show
“DELETED”
•
Once the BT phone is deleted, if
the same phone has to be paired
again, then the connect request
should be initiated from phone.
NOTE
BT delete is possible only when
Infotainment system is not in BT
mode. If the current mode is BT,
then the user has to come out of
BT short press of
REJECT
button and then try to disconnect
the BT phone by long press on the
REJECT button.
9.6. Remot Control Profile (AVRCP)
Radio supports limited functionality
in remote control profile. Paired BT
phone can be used as a remote
control to access the audio controls
in Audio Streaming mode. BT phone
can issue mute, un-mute, previous
track, next track, play and pause
command. Radio will receive those
and process the action accordingly.
Meta data processing will not be
supported.
10. Audio Settings
10.1. Volume Control
Press / to adjust the audio
volume level
There is same volume control
across audio sources (Tuner, CD,
USB, Aux)
When the volume level has been
adjusted the radio displays the
volume level for 5 seconds.
MUSIC SYSTEM - OPERATOR’S MANUAL
•
If the paired BT phone is not
available, then the system will
continue to play the current
source (tuner, CD, USB, AUX).