TATA Motors nano genX, Owner'S Manual

Page: 85 / 156

83 83
IN CASE OF EMERGENCY
IF YOU HAVE A FLAT TYRE
Remove wheel-mounting bolts and
take out flat tyre and cover (if fitted).
Roll the spare wheel into position
and align the holes in the wheel with
tapered bolts and tighten them
properly.
Lower the jack completely then
tighten the wheel bolts one by one
using wheel spanner. Fit the wheel
cover back (if fitted).
Restore all the tools and jack at it’s
location.
Place the flat tyre at spare wheel
location as described and tighten
properly.
Front Jacking Point
Rear Jacking Point
CAUTION
Follow the jacking instructions.
Make sure to set the jack properly
in the jack point. Raising the
vehicle with improperly positioned
will damage the vehicle or may
cause the personal injury.
Do not carry any other work or
never get under the vehicle
supported by jack.
Do not start or run the vehicle while
supported by jack.
Block the wheel diagonally
opposite to flat tyre being
changed, if necessary.
Do not lift the vehicle with any
passenger inside.
Raise the vehicle only high
enough to remove and change the
flat tyre.