TATA Motors nano genX, Owner'S Manual

Page: 68 / 156

66
BEFORE DRIVING
Please ensure to check (Refer
maintenance)
1. Tyre pressure and condition of
tyres. Inflate to recommended
tyre pressure if required.
2. Coolant level to First fill.
3. Engine oil level up to Max mark
on dipstick. (Do not overfill)
4. Check Brake fluid level. Make
sure that the brake fluid level
warning light is off when the
parking brake is released with
the engine running.
5. Water in windshield washer
reservoir. Top up if required.
6. Battery electrolyte level.
7. Fuel level. Ensure sufficient
Fuel.
Adjust
1. Check position of seat. If
required adjust to your
convenience.
2. Check adjustment of all rear
view mirrors.
Ensure
1. Hood is fully closed.
2. All doors are properly closed
and locked.
3. Check that any items you may
be carrying are stored properly
and fastened down securely.
4. Seat belts are fastened
5. Ensure all mirrors, windows
and lamps are clean and
unobstructed. Remove dust,
frost, snow or ice if any, on
these.
6. All switches & lamps are
working
7. Check and ensure that all the
gauges and indicators in the
instrument cluster are working.
8. Gear shift lever is in neutral
position
9. Parking brake is released.
10. Engine oil level.
11. Brake fluid level.
12. Windscreen washer fluid level.
13. Battery solution level.
14. Bonnet latch operation.
15. Pull the bonnet release handle
inside the vehicle. Make sure
that you cannot open the hood
all the way without releasing
the secondary latch.
16. Be sure to close the hood
securely after checking for
proper operation. See All
Latches, Hinges and Locks
of
‘PERIODIC MAINTENANCE
SCHEDULE’ in the
‘INSPECTION & MAINTE-
NANCE’
section for lubrication
schedule.
BEFORE DRIVING
DRIVING