TATA Motors nano genX, Owner'S Manual

Page: 36 / 156

34
STEERING LOCK CUM IGNITION SWITCH
AN OVERVIEW
STEERING LOCK CUM IGNITION
SWITCH:
Key of ignition switch is common
for door lock & steering lock.
The ignition switch is on the right
side of the steering column. The
switch has four positions.
LOCK - Steering Locked
ACC - All accessories
function ‘ON’.
ON - Vehicle ON and all
electricals ‘ON’
START - Engine crank
LOCK:
You can insert or remove the key
only in this position. The steering
column is locked when the key is
removed.
ACC :
By turning key to ACC (key in)
position, all accessories function
like music system will be ‘ON’.
ON :
Engine running and all electrical
gadgets and accessories ON.
START :
Turn the key further clockwise to the
START position (spring loaded) to
start the engine. As soon as the
engine starts release the ignition key
to ON position. While cranking, all
accessories will be momentarily
‘OFF’.
NOTE
Do not crank the engine for more
than 10 seconds continuously. If
the engine does not start wait for
15 seconds before cranking it
again. Release the key
immediately after starting the
engine.
By turning the ignition key from ‘ON’
position to ‘ACC’ position, engine
can be stopped.
WARNING
Do not leave the ignition switch in
the ‘ON’ position if the engine is
not running, as the battery will
discharge
.