TATA Motors nano genX, Owner'S Manual

Page: 33 / 156

31 31
AN OVERVIEW
GAUGES & INDICATORS
5. Instantaneous Fuel Economy :
This mode calculates and shows in
bar graph the instant behavior of fuel
economy.
NOTE
• IFE will vary frequently as per
driving pattern.
• The IFE display does not show
Fuel Economy of last drive. It
indicates Instantaneous Fuel
economy of current Drive when
Ignition is turned ‘ON’.
• The display does not show
actual value unless vehicle is
moving.
• The indication on the display
may be delayed if fuel
consumption is affected by
driving pattern.
6. Display illumination setting:
You can adjust night time illumina-
tion for display and graphics by us-
ing the SET/MODE buttons. User
can enter in to this mode by long
pressing of MODE button with park
lamp ON. Once enter in to the illumi-
nation setting mode above screen
will be visible in odometer region.
User can do this setting in max ten
steps by short press of set mode
once enter into this mode.
In case of battery disconnect
illumination level will go to default
value.
7. Digital Clock :
Whenever the battery terminals or
related fuses are disconnected you
must reset the clock time.This fea-
ture is available when ignition switch
is in ON position. Clock support for
both 24 hour and 12 hour format and
you can set clock by using SET and
MODE switches as follows
WARNING
Do not adjust clock or other
settings while driving.
To adjust the values in Hrs., Min. and
AM/PM mode, press ‘SET’ and
‘MODE’ knob on instrument cluster
for changing the clock settings
respectively.
A delayed press on the ‘SET’ knob
for selected value will confirm it and
move towards next value.