TATA Motors nano genX, Owner'S Manual

Page: 30 / 156

28
GAUGES & INDICATORS
AN OVERVIEW
screen will be visible in odometer
region.
User can do this setting in max ten
steps by short press of set mode
once enter into this mode.
In case of battery disconnect
illumination level will go to default
value.
Digital Clock :
Whenever the battery terminals or
related fuses are disconnected you
must reset the clock time.This
feature is available when ignition
switch is in ON position. Clock
support for both 24 hour and 12 hour
format and you can set clock by using
SET and MODE switches as follows
WARNING
Do not adjust clock or other
settings while driving.
To adjust the values in Hrs., Min. and
AM/PM mode, press ‘SET’ and
‘MODE’ knob on instrument cluster
for changing the clock settings
respectively.
A delayed press on the ‘SET’ knob
for selected value will confirm it and
move towards next value.
When the remaining distance is
below 25 km "rEFUEL" will be dis-
played on DTE screen.
NOTE
• The DTE will update with new
value when fuel is added more
than 3 Litres at a time.
• The average fuel consumption
and distance to empty values
may vary significantly based on
driving conditions, driving
habits, and condition of the
vehicle.
• The distance to empty value is
an estimate of the available
driving distance.
• If low fuel warning light turns
‘ON’, fill the fuel tank
immediately regardless the
value of displayed DTE.
• If vehicle is not on level ground
and negative of battery has
been disturbed,the DTE function
may not operate correctly.
This value may differ from the actual
driving distance available.
Display illumination setting :
You can adjust night time illumina-
tion for display and graphics by
using the SET / MODE buttons. User
can enter in to this mode by long
pressing of MODE button with park
lamp ON. Once enter in to the
illumination setting mode above