TATA Motors nano genX, Owner'S Manual

Page: 64 / 156

62
SEAT BELTS
GETTING STARTED
Always make sure the shoulder
portion of the seat belt is
positioned across your shoulder
and near your neck, but never
under your arm. on your neck, or
on your upper arm.
6. The belts are meant (intended)
for adult occupants only.
7. Each belt should be used by one
occupant only. The belt must not
be put round a child, seated on
passengers lap.
8. When the belt has been in use
in a serious accident or shows
signs of severe fraying / damage
or of having been cut, replace with
an approved belt kit.
9. The belt must not be altered or
modified during use.
WARNING
Using one seat belt for more
than one person at a time is
dangerous. A seat belt used In
this way cannot spread the
impact forces properly and the
two passengers could be
crushed together and seriously
injured. Never use one belt for
more than one person at a time.
10. The belts if required should be
replaced, by Authorised
personnel only.
11. The belt should not be
disassembled. If required,
authorised personnel only
should carry out disassembly
and assembly.
12. Clean the webbing with a mild soap
solution recommended for
upholstery. Bleaching or dyeing
the webbing may weaken it.
Lap belt:
Pull the tongue to the desired length.
Insert it into the buckle until you hear
a click.
Adjust the belt length. To lengthen
the belt, hold the tongue at a right
angle to the webbing and pull. To
shorten, pull the loose end of the
webbing.
To unfasten, depress the button in
the buckle.
WARNING
Positioning the lap portion of the
Seat Belt too high can be
dangerous as in a collision, this
would concentrate the impact
force directly on the abdominal
area, causing serious injury.
Wear the lap portion of the belt
snugly and as low as possible.