TASKalfa TASKalfa 4002i Page 85 Operation Manual Download

Page: 85 / 662

2-20

Installing and Setting up the Machine > Touch Panel

Display of Keys That Cannot Be Set

Keys of features that cannot be used due to feature combination restrictions or non-installation of options are in a non-
selectable state.

Original Preview

You can display a preview image of the scanned document on the panel.

Display the screen.

[

Home

] key > [

Copy

] key

Place the originals.

Normal

Grayed out

Hidden

In the following cases, the key is
grayed out and cannot be selected.
• Cannot be used in combination

with a feature that is already
selected.

• Use prohibited by user control.
• [

Preview

] has been selected.

• For functions that cannot be

changed when using proof copy.

Cannot be used because an option
is not installed.

NOTE

If a key that you wish to use is grayed out, the settings of the previous user may still be in effect. In this case, select
the [

Reset

] key and try again.

If the key is still grayed out after the [

Reset

] key is selected, it is possible that you are prohibited from using the

function by user control. Check with the administrator of the machine.

NOTE

• To view a preview of an image stored in a Custom Box, refer to the following:

Previewing Documents/Checking Document Details (page 5-52)

• The procedure described here is for copying a single-page original.

Staple
/Punch

Off

Combine

Staple
/Punch

Off

Combine

Staple
/Punch

Off

Combine

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands

TASKalfa TASKalfa 4002i, Operation Manual

Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands