manualshive.com logo in svg

TASKalfa TASKalfa 4002i, Operation Manual, Page: 102 / 662

Share
Download
TASKalfa TASKalfa 4002i Operation Manual Download Page 102

2-37

Installing and Setting up the Machine > Network Setup

4

[Home] key > [Wi-Fi Direct]

5

Note the network name (SSID), IP address, and password.

6

Configure the handheld device.

1

[

Settings

] > [

Wi-Fi

]

2

Select the network name (SSID) appeared in step 5 from the list.

3

Enter the password that was provided in step 5 > [

Connect

]

The network between this machine and the handheld device is configured.

Configuring the Connection by Using Push Button

When your computer or handheld device does not support Wi-Fi Direct but supports WPS, you can configure the 
network using push button.

1

Display the screen.

[

System Menu/Counter

] key > [

System/Network

] > "Network" [

Next

] > "Wi-Fi Direct 

Settings" [

Next

] > "Wi-Fi Direct" [

Change

]

2

Configure the settings.

[

On

] > [

OK

]

3

Restart the network.

[

System Menu/Counter

] key > [

System/Network

] > "Network" [

Next

] > "Restart Network" 

[

Start

] > [

Yes

]

4

[Home] key > [Wi-Fi Direct]

5

Press the push button on the computer or handheld device and 

select [Push Button] on the screen of operation panel 

simultaneously.

The network between this machine and the computer or handheld device is configured.

IMPORTANT

You can connect up to three handheld devices at the same time using Wi-Fi Direct setting. When the devices 
that support Wi-Fi Direct are connected, if you want to connect other device, disconnect the already-
connected devices from the network. The disconnection methods are as follows:
• Disconnect the network from the computer or handheld computer
• Disconnecting all devices from the network on the operation panel

Select [Home] > [Wi-Fi Direct] > [Connected Device List] > [Disconnect All]

• Configuring auto disconnecting time from the System menu

Wi-Fi Direct Settings (page 8-50)

• Configuring auto disconnecting time from the Command Center RX

Command Center RX User Guide

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments