TASKalfa TASKalfa 4002i Operation Manual Download Page 151

Page: 151 / 662

3-8

Preparation before Use > Loading Paper

Adjust the position of the paper width guides located on the left

and right sides of the cassette.

Load paper.

NOTE

When using SRA3/12×18", A3, or Ledger paper, adjust the auxiliary guide accordingly.

IMPORTANT

• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan the paper before loading it in the

cassette.

Precaution for Loading Paper (page 3-2)

• Before loading the paper, be sure that it is not curled or folded. Paper that is curled

or folded may cause paper jams.

• Ensure that the loaded paper does not exceed the level indicator (see illustration

above).

• If paper is loaded without adjusting the paper length guide and paper width guide,

the paper may skew or become jammed.

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 4002i

Reviews:

TASKalfa TASKalfa 4002i, Operation Manual, Page: 151 / 662

Search results

Summary of Contents for TASKalfa 4002i

Reviews: