Home
/
TASKalfa
/
TASKalfa 4002i
/
Operation Manual

TASKalfa TASKalfa 4002i, Operation Manual, Page: 533 / 662

Share

Page: 533 / 662

TASKalfa TASKalfa 4002i Operation Manual Download Page 533

10-34

Troubleshooting > Troubleshooting

Cannot punch at the
specified position.

Have you selected a position
that cannot be punched?

If the selected paper is not
changed and [

Continue

] is

selected, punch is released.
Select the available paper.
Select [

Continue

] to print.

Cannot punch this
paper.

Did you select a paper size/type
that cannot be punched?

If the selected paper is not
changed and [

Continue

] is

selected, punch is released.
Select the available paper.
Select [

Continue

] to print.

Cannot staple at the
specified position.

Have you selected a position
that cannot be stapled?

If the selected paper is not
changed and [

Continue

] is

selected, staple is released.
Select the available paper.
Select [

Continue

] to print.

Cannot staple this
paper.

Did you select a paper size/type
that cannot be stapled?

If the selected paper is not
changed and [

Continue

] is

selected, staple is released.
Select the available paper.
Select [

Continue

] to print.

Cannot use ##### due
to a failure.

―

Call service.

―

Checking the waste
toner box.
####

Is the waste toner box full?

Replace the toner container.
Reuse the black (K) toner
container as a waste toner box.
Handle the color toner
containers according to the
instructions supplied with them.
Select [

Next

]. The instructions

will be displayed.

NOTE

If you select [

Open Toner

Container Cover

], you can

open the Toner Container Cover
that you closed accidentally.

―

Check the document
processor.

Is the top cover of the document
processor open?

Close the document processor
cover.

―

Is the document processor
open?

Close the document processor.

―

Check the paper in the
multi purpose tray.

—

The paper size is different. Set
selected size paper and select
[

Continue

].

Check the side feeder.

—

The side feeder is not installed
correctly. Attach the side feeder.

―

Message

Checkpoints

Corrective Actions

Reference

Page

«
...
531
532
533
534
535
...
»

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments